Wall-Mounted Home Battery
2.56–17.66 kWh per unit / 24V & 48V systems / ≥6000 cycles
Every cell is monitored and balanced individually, not just the pack as a whole.up to 17.66 kWh in a single unit, so more storage takes fewer boxes on the wall.
Cell-level monitoring and balancing keep every cell inside its limits, which is where pack safety actually starts.
Cobalt-free LiFePO₄ chemistry stays thermally stable through daily household charge and discharge cycling.
Capacities from 2.56 to 17.66 kWh cover apartments through large single-family loads on the same platform.
A flat back panel and a 138–262 mm depth keep the unit clear of the floor and within easy reach for servicing.
Up to 15–16 units run in parallel, so an installation can grow without redesigning the whole system.
Ten-year warranty and a 6,000-cycle design life put the cost per stored kWh on solid ground.
- The Wall-Mounted Home Battery Series is a family of LiFePO₄ storage units built for residential solar and backup applications. Eight models span 2.56 to 17.66 kWh in either 24V or 48V nominal systems, all sharing the same cell chemistry, monitoring design and inverter protocol. Installers can standardise on one platform and size each job by choosing a unit rather than changing equipment.
- The series uses cobalt-free lithium iron phosphate, which holds its structure under repeated cycling and resists thermal runaway far better than ternary lithium chemistries. For a unit mounted inside a living space or utility room, that difference matters more than raw energy density. The chemistry is also non-toxic and non-polluting at end of life.
- Protection logic reads voltage and temperature at each cell, and actively balances across the string. Most pack failures start as one cell drifting out of range — catching that early is what keeps a storage system in service for ten years instead of five. This is the first of the series' four headline features, and the one professional buyers ask about most.
- Capacity goes up to 17.66 kWh in a single module. Fewer units mean fewer mounting points, fewer cable runs and less commissioning time per kilowatt-hour installed — which is exactly the cost an installer feels on every job. Distributors benefit too, since fewer SKUs cover more of the market.
- Every model mounts on the wall with a flat rear chassis. Depths range from 138 mm on the 10.24 kWh unit to 262 mm on the 17.66 kWh unit, so even the largest stays out of the way in a garage or utility room. The two 100 Ah models are offered in two housing shapes each — the P and R variants share identical electrical ratings, so the choice is purely about which box fits the space available.
- CAN and RS485 are fitted as standard, and the series is validated against Victron, MUST, Growatt, GoodWe, Solis, Deye, Sofar, Voltronic and Luxpower. Compatibility is the single biggest blocker in this category — a battery that fails to talk to the inverter is a truck roll, not a sale. Listing these brands openly removes the buyer's main risk question.
- Built for residential solar self-consumption, peak-shaving and backup power, plus light commercial storage where a compact indoor unit is preferred. The 24V models suit smaller off-grid cabins, sheds and secondary circuits, while the 48V models handle whole-house loads. Up to 15–16 units can be paralleled to reach multi-hundred-kilowatt-hour capacity without leaving this platform.
- Every model carries a 10-year warranty and a designed cycle life of 6,000 cycles, backed by UN38.3, MSDS, CE, UL1973 and IEC62619 certification at both cell and pack level. Customisation is available on enclosure branding, colour, label design, connector selection and packaging, with samples supplied ahead of volume orders.
| Item | Specification | ||
|---|---|---|---|
| Battery type | LiFePO4 (lithium iron phosphate) | ||
| Nominal voltage | 51.2V (48V models) · 25.6V (24V models) | ||
| Working voltage | 42–58.4V (48V models) · 21–29.2V (24V models) | ||
| Energy per unit | 2.56 – 17.66 kWh | ||
| Depth of discharge | >95% @25°C · >90% on the 17.66 kWh model (verify) | ||
| Designed cycle life | ≥6000 cycles | ||
| Standard continuous current | 100A (200–345 Ah models) · 50A (100 Ah models) | ||
| Max continuous current | 200A (200–345 Ah models) · 100A / 1C (100 Ah models) | ||
| Discharge temperature | −20°C to 60°C | ||
| Charging temperature | 0°C to 50°C | ||
| Communication | CAN, RS485 | ||
| Compatible inverters | Victron · MUST · Growatt · GoodWe · Solis · Deye · Sofar · Voltronic · Luxpower | ||
| Maximum units in parallel | 15 (17.66 / 11.78 kWh) · 16 (all others) | ||
| Cooling | Natural cooling | ||
| Protection grade | IP21 — indoor installation only | ||
| Warranty | 10 years | ||
| Certification | UN38.3 · MSDS · CE · UL1973 · IEC62619 (cell & pack) |
