Off-Road Racing Car Battery
High-Current · Discharge · 2S–4S · 5000–10000mAh · 40C–80C · Eco-Friendly
lighter than other battery types, cutting overall vehicle weight and lifting racing performance，more energy stored per gram of weight, for longer run times.
Lightweight construction cuts overall vehicle weight and sharpens racing performance.
High-current discharge delivers instant, massive power for hard acceleration and big jumps.
High specific energy packs more energy per gram for longer run times between changes.
Eco-friendly new-energy chemistry — clean, safe and built to last.
A full 2S–4S range from 5000 to 10000 mAh fits different chassis, classes and tracks.
40C–80C discharge ratings put race-grade punch on tap the moment you hit the throttle.
- The limid Off-Road Racing Car Battery Series is built for RC racing cars that need strong power in a light package. Combining a lightweight Li-Po build, high-current output and high specific energy, it gives racers the punch and run time to compete on demanding off-road tracks.
- Compared with other battery types, the series keeps weight low. Less weight means a lighter overall vehicle, quicker acceleration, better cornering and less strain on the drivetrain — all of which translate directly into faster lap times.
- The pack is designed to release a large current in a very short time, providing strong, immediate power for hard acceleration off the line, steep climbs and big jumps — the bursts that decide races on rough off-road courses.
- Higher energy storage per unit of mass means more usable capacity from the same weight, extending run time per charge so racers can stay on the track longer and get more practice out of every pack.
- Manufactured as a green, eco-friendly new-energy battery, the series is clean to use and built for a long service life, delivering dependable performance season after season without polluting the environment.
- Available from 5000 to 10000 mAh in 2S, 3S and 4S configurations, with 40C to 80C ratings. This lets drivers fine-tune power, weight and run time to suit each chassis and racing class.
- Suited to 1/8 and 1/10 off-road buggies, short-course and monster trucks, rock crawlers and on-road racers, as well as general bashing. One series covers practice, club racing and competition with a consistent power supply.
- Custom capacity, cell configuration, C-rate, connector type, wire length and pack graphics are available to meet brand and OEM requirements, with samples and volume production.
| Capacity (mAh) | Model | Dimensions L×W×H (mm) | Weight |
|---|---|---|---|
| 5000 | 2S 5000 40C | 92×43×23 | 185g |
| 3S 5000 40C | 92×43×34 | 275g | |
| 5200 | 2S 5200 50C | 134×43×20 | 255g |
| 3S 5200 50C | 134×43×30 | 365g | |
| 4S 5200 80C | 134×43×40 | 475g | |
| 6000 | 2S 6000 40C | 158×44×20 | 290g |
| 3S 6000 60C | 158×44×30 | 437g | |
| 6500 | 3S 6500 60C | 138×43×33 | 427g |
| 7000 | 2S 7000 40C | 138×43×21 | 278g |
| 4S 7000 40C | 138×43×42 | 521g | |
| 10000 | 4S 10000 60C | 170×50×40 | 745g |
